لرزش/گشتاور/نیرو/خمش/وزن

مرتب سازی بر اساس:   نام محصول (صعودی | نزولی)، قیمت (صعودی | نزولی)، امتیاز مشتریان (صعودی | نزولی)

سنسور مقاومت حساس به نیرو Force Sensitive Resistor - Small

Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

Piezo Vibration Sensor - Large with Mass

Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

Piezo Vibration Sensor - Large

Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

Piezo Vibration Sensor - Small Horizontal

Description: The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

Piezo Vibration Sensor - Small Vertical

Description: The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

Digital Piezo Disk Vibration Sensor

 

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vabiration.

 

ماژول اندازه گیری فشار با قابلیت اندازه گیری تا 20 نیوتون محصول CJMCU

این محصول شامل سنسور سنجش فشار مقاومتی و ماژول آمپلی فایر جهت اتصال آسان سنسور به آردوینو و سایر کنترلر ها می باشد.

CJMCU-449 bending deformation force sensing resistor pressure sensor resistor amplifier module
Force range: 0.2N to 20N 
Output mode: Analog voltage output
Power supply: 3V3 or 5V optional
Size: 14mm * 20.5mm
Weight: 1.5g

Flex Sensor 2.2" سنسور سنجش خمیدگی

Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Flex Sensor 4.5" سنسور سنجش خمیدگی

Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

Force Sensitive Resistor 0.5"

Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Force Sensitive Resistor - Square

Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Geophone - SM-24

Description: Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which can easily be read by a microcontroller. The SM-24 geophone element is designed to offer the highest performance in seismic exploration based upon field-proven I/O Sensor technology. Low distortion, combined with excellent specifications, provide high-fidelity data. Basically, it’s a super low frequency microphone for the ground.

Flexiforce Pressure Sensor - 100lbs.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Flexiforce Pressure Sensor - 25lbs.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

Tilt Sensor - AT407

Description: This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a connection.

SoftPot Membrane Potentiometer - 200mm

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

Force Sensitive Resistor - Long

Description: This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Flexiforce Pressure Sensor - 1lb.

Description: This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.

SoftPot Membrane Potentiometer - 50mm

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

SoftPot Membrane Potentiometer - 500mm

Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications.

Piezo Element

Description: Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.

ماژول آنالوگ به دیجیتال HX711

دقت ماژول24 بیت بوده و خروجی آن از نوع سریال می باشد  که از این رو براحتی با هر نوع میکرو کنترلر قابل برنامه نویسی هست.

Load Sensor - 50kg

Description: This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.

Load Cell - 200kg, Disc (TAS606)

Description: This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.

Load Cell - 10kg, Wide Bar (TAL201)

Description: This wide bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.

100g Micro Load Cell

Description

• Wheatstone bridge sensor
• Rated output: 600 μV/V
• Supply voltage: 3 -10 V DC
• RoHS compliant

20 Kg Micro Load Cell

Description

  • Capacity: 20kg
  • Wheatstone bridge sensor
  • Small size: 55.25mm x 12.7mm x 12.7mm
  • Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
  • Compensated temperature range: -10°C to +40°C
  • Operating temperature range: -20°C to +55°C
  • RoHS compliant

5 Kg Micro Load Cell

Description

  • Capacity: 5kg
  • Wheatstone bridge sensor
  • Small size: 55.25mm x 12.7mm x 12.7mm
  • Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
  • Compensated temperature range: -10°C to +40°C
  • Operating temperature range: -20°C to +55°C
  • RoHS compliant

0.78 Kg Micro Load Cell

Description

• Capacity: 780g
• Wheatstone bridge sensor
• Small size: 45mm x 9.3mm x 6mm
• Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface
• Compensated temperature range: -10°C to +40°C
• Operating temperature range: -20°C to +55°C
• RoHS compliant

100 Kg Type S Load Cell

Description

  • Maximum load capacity: 100 kg
  • Wheatstone bridge sensor
  • Individually calibrated at the factory
  • Plugs into the Phidgets PhidgetBridge Wheatstone Bridge Sensor Interface  (not included)
  • RoHS compliant

Interlink Electronics 0.2" Circular FSR (Short)

Description

• Single-zone force sensing resistor
• Device has a 5.6 mm diameter active area and is available in 4 connection options
• Part of the single zone Force Sensing Resistor family
• RoHS Compliant

500g Micro Load Cell

Description

• Output sensitivity: mv/v 0.5±0.1
• Capacity: 500g
• Green: Sig + white:Sig -
• Recommended excitation voltage 5v