• Operating Voltage: 6.0V to 42V
• Compatible with standard solderless breadboards and perfboards
• 550 kHz switching frequency
• Integrated over-temperature and over-current shutoff
• Generate higher output voltages from input voltages as low as 2.5 V
• Compatible with standard solderless breadboards and perfboards
• Operating Voltage: 2.5V - 12V
• 1.4 A switch allows for input currents up to 1.4 A
DSN6009 is a 4A switching current performance boost module. The module uses a second-generation high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577
This module is adjustable step-down module, the module can be adjusted above sinking blue adjustable resistance to change the output voltage. Input and output pressure of 1V, 0.8V minimum output voltage can be.
ماژول تغذیهLM2596 در مواقع یک مبدل باک (buck) یا رگولاتور متغیر سوییچینگ بوده که امکان تغییر ولتاژ خروجی به وسیله مولتی ترن درنظر گرفته وجود دارد. از این ماژول می توان در مصارف مختلف صنعتی یا غیرصنعتی از جمله ساخت یک منبع تغذیه ساده استفاده کرد. مدل دیگری از این ماژول با ولتمتر داخلی وجود دارد که در صورت نیاز می توانید از این ماژول نیز استفاده کنید.
- Model: AMS1117-3
- Material: PCB + plastic + Copper
- Input: DC4.5V~7V (Input voltage must be higher than output voltage above 1V)
- Output: 3.3V, 800mA (Loading current no more than 800mA)
- With installation holes, easy to use
Model: AMS1117-5.0V
- Input: DC 6~12V (Input voltage must higher than output voltage above 1V)
- Output: 5.0V +/- 0.05V, 800mA (Loading current must below 800mA)
HM dedicated DC-DC step-down module (support 2S ~ 5S lithium polymer), DIY mobile power,
automotive power, communications equipment power supply,
all kinds of size and weight have a demanding occasion.
ماژول تغذیهLM2596 در واقع یک منبع تغذیه کامل با نمایشگر ولتاژ و تنظیم ولتاژ خروجی بوده که ولتاژ ورودی یا خروجی را می توان با فشردن یک کلید بر روی سون سگمنت مشاهده کرد
This module is adjustable step-down module, the module can be adjusted above sinking blue adjustable resistance to change the output voltage. Input and output pressure of 1V, 0.8V minimum output voltage can be.
Using voltage:Ac 220 v
The most powerful:4000 w (pick resistance load)
Voltage regulation:0-220 - v
Size: 91MMx 59 mm wide (not including the handle) total 34 mm high
Type:ZS-PA4000A
This display part adopts advanced voltage meter microprocessor,boosting part adopts American imported boost controller, through the use of the power MOSFET on resistance and save the current detecting resistor, maximizing it efficiency to 96.4%. Import the big power MOS low resistance pipe, large package, high current, high efficiency Schottky, super wide thickened wire of PCB low temperature rise, high power and high efficiency.
LM317 is one of the most widely used power integrated circuits, which not only has the simplest form of a fixed three-terminal voltage regulator circuit, but also with output voltage adjustable features. In addition, it also has a wide pressure range, good regulation performance, low noise, ripple rejection advantages. lm317 is adjustable voltage regulator 3 correct, when the output voltage range of 1.2 volts to 37 volts to provide more than 1.5 amps, this regulator is very easy to use.
Input of 2V to 5V DC voltage , stable output 5V DC voltage , output 1000ma current input with two AA batteries , a single lithium battery power supply output 1200ma current , for mobile phones , cameras, single-chip , digital product supply .
1. This module uses imported high-performance chip, the performance is superior to the general module.
2. Enter any 0.9V ~ 5V DC voltage of 5V DC output voltage can be stable, with a single AA battery can deliver up to 200 ~ 300MA current, two AA batteries to output 500 ~ 600MA of current, for your phone, camera, microcontroller and digital products supply
• Ability to convert both higher and lower input voltages
• Operating Voltage: 2.7V to 11.8 V
• Integrated over-temperature protection
• Default output voltage: 5 V
شارژ باتری های لیتیوم اگر به درستی انجام نشود موجب کاهش عمر باتری خواهد شد جریان و ولتاژ خروجی در شارژ باتری ها لیتیوم با روند شارژ باتری متغیر است بدین منظور جهت شارژ کامل باتری و جلوگیری از کاهش عمر باتری می توان از این ماژول استفاده کرد.
Protection Short circuit / overload / over voltage
Input Voltage & Frequency Range : 85 ~ 264VAC/47 ~ 63Hz
Inrush Current : 20A @ 120VAC ( cold start )
Output adjustment range : ± 10% ( rated output voltage )
Overload : 105% to 200% ( rated load ) , since the resumption of
Protection Short circuit / overload / over voltage
Input Voltage & Frequency Range : 85 ~ 264VAC/47 ~ 63Hz
Inrush Current : 20A @ 120VAC ( cold start )
Output adjustment range : ± 10% ( rated output voltage )
Overload : 105% to 200% ( rated load ) , since the resumption of
Input voltage
miniaturization
Protection Short circuit / overload / over voltage
100% full load burn-in test
Input Voltage & Frequency Range : 85 ~ 264VAC/47 ~ 63Hz
• Generate higher output voltages from input voltages as low as 2.5 V
• Compatible with standard solderless breadboards and perfboards
• Operating Voltage: 2.5V - 5V
• 1.4 A switch allows for input currents up to 1.4 A
• Compatible with standard solderless breadboards and perfboards and connectors
• Operating Voltage: 2.7V - 11.8V
• Has a typical efficiency of over 90% and can deliver 500mA to 1A
• Integrated over-temperature and short-circuit protection
with power indicator
with a voltage meter display, using advanced microprocessor, voltmeter error of ± 0.05V , Range 0 ~ 40V . (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is 4V above)
