سنسور ها گاز اکثرا دارای خروجی آنالوگ هستند که مقدار ولتاژ خروجی با گاز رابطه مستقیم دارد به همین جهت راه اندازی و استفاده از آنها بسیار ساده بوده و حتی بدون استفاده از میکرو و به تنهایی با استفاده از OPAMP قابل استفاده خواهند بود.
This 24-bit analog to digital and signal conditioning module is designed specifically for weight scales, weight sensor and industrial control applications to interface directly with a bridge sensor. The module is based on HX711 chip.
Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.
Description
• Comes in handy for measuring the output of sensors with 5V ranges
• Measures DC voltage from 0-5 volts with 2.5% accuracy
• Clear and easy to read scale and an adjustable dial
• Meter's Face: 45x45mm
• Mounting hole should be 38mm
• Overall depth: 35mm
سنسورهاي جريان اثر هال سري ACS758 از محصولات شركت Allegro است. اين سنسورها براي اندازه گيري جريان دقيق AC و DC در سيستمهاي مختلف طراحي شده اند. از عمده كاربردهاي اين سنسور مي توان به كنترل موتور، تشخيص و مديريت مصرف كننده هاي توان، منابع تغذيه و مبدلهاي DC به DC، AC به DC و محافظت در برابر اضافه بار مصرف اشاره نمود. اين قطعه شامل يك مدار اثر هال دقيق با آفست پايين و يك مسير جريان از جنس مس با خلوص بالاست. مسير جريان بگونه اي طراحي شده كه از نزديك چيپ اثر هال عبور كند. عبور جريان از مسير هادي مس ميداني مغناطيسي توليد ميكند كه بوسيله سنسور اثر هال دريافت و به ولتاژي متناسب با شدت ميدان تبديل مي شود. دقت اين سنسور به واسطه نزديكي سيگنال مغناطيس با مبدل اثر هال بهينه شده است. با عبور جريان و ايجاد ميدان مغناطيسي ولتاژي متناسب با جريان عبوري توسط آي سي اثر هال ايجاد مي شود. بخش اثر هال اين سنسور كه با استفاده از تكنولوژي BiCMOS ساخته شده، آفست كمي دارد و با قابليت برش سيگنال يا chopping پايدار شده است.
XFS5152CE is iFLYTEK introduced a new highly integrated speech synthesis chip, enabling Chinese and English speech synthesis; and integrates voice encoding and decoding functions, enables users to record and playback; In addition, further innovative It integrates lightweight voice recognition, support identification 30 command of the word, and supports the user's command word customization requirements.
Description:
1 module S8050 driver transistor
2 Operating Voltage 3.3V-5V
3 has a fixed bolt hole for easy installation
4 small plates PCB size: 3.2cm * 1.3cm
5 I / O port when the input high, the buzzer sounds
Introduction:
Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
Description :
WTW - 16P/28P adopts WT588D voice chip as control core. Only the peripheral gets power connection, the speaker, and the control terminals can work.
N9200 is a provider of serial MP3 chip, the perfect integration of MP3 , WMV hardware decoding. While software support TF card driver to support computer directly update spi flash content, support FAT16 , FAT32 file system. Can be accomplished by a simple serial UART serial command line instructions or play the specified music, as well as how to play music and other functions, without the cumbersome underlying operating, beautiful sound, easy to use, stable and reliable is the most important feature of this product. In addition, this chip is the depth of customized products, designed for fixed voice playing field to develop low-cost solutions.
product description
NV020 SD module is a rewritable audio content of high-capacity storage type voice module, can plug a maximum capacity of 1GB SD card memory. You can load WAV format voice and voice AD4 format.
The 9DOF Sensor board is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3205 gyro.
یک ماژول قدرتمند و دقیق ! این ماژول تقریبا تمام نیاز های شما را برای برای ساخت یک سامانه اندازه گیری داخلی یا همان IMU با 9 درجه آزادی و نه محور فراهم می نماید، دقت بسیار بالا و سیستم پيشرفته پردازش حركت ديجيتال داخلي (DMP)از ویژگی های منجصر به فرد این ماژول می باشد
یک ماژول قدرتمند برای ربات پرنده ، خودروی هوشمند و یا سایر پروژه های شما! این ماژول از چهار سنسور L3G4200D ( سنسور زاویه سنج سه محوره ) ، ADXL345 (سنسور شتاب سنج سه محوره ) ، HMC5883L ( قطب نمای دیجیتال ) و BMP185 که یک سنسور فشار بارومتریک می باشد تشکیل شده است .
Description
• Very small sensor board with 9 degrees of freedom
• Includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 gyro
• Simple I2C interface with mounting hole to attach
• Operating voltage: 3.3 volts
• RoHS Compliant
The 4th Generation MTi sets the industry standard for reliable MEMS based AHRS, VRU and IMUs. The MTi 10-series gives the systems integrator a choice of three different integration levels (IMU, VRU or AHRS).
سنسور ها گاز اکثرا دارای خروجی آنالوگ هستند که مقدار ولتاژ خروجی با گاز رابطه مستقیم دارد به همین جهت راه اندازی و استفاده از آنها بسیار ساده بوده و حتی بدون استفاده از میکرو و به تنهایی با استفاده از OPAMP قابل استفاده خواهند بود.
سنسور ها گاز اکثرا دارای خروجی آنالوگ هستند که مقدار ولتاژ خروجی با گاز رابطه مستقیم دارد به همین جهت راه اندازی و استفاده از آنها بسیار ساده بوده و حتی بدون استفاده از میکرو و به تنهایی با استفاده از OPAMP قابل استفاده خواهند بود.
سنسور ها گاز اکثرا دارای خروجی آنالوگ هستند که مقدار ولتاژ خروجی با گاز رابطه مستقیم دارد به همین جهت راه اندازی و استفاده از آنها بسیار ساده بوده و حتی بدون استفاده از میکرو و به تنهایی با استفاده از OPAMP قابل استفاده خواهند بود.