Directly plug on the Arduino board
• Can use the Arduino to drive the matrix like the Colorduino/Rainbowduino
• Hardware 16MHz PWM support
• 8 super source driver channels of 500mA each

• SD card shield to add storage in Arduino project
• SD card, Micro SD card and SDHC card supportable
• On-board toggle switch to select the SD card type
• I2C header and UART header on board

• Supports both Seeeduino MEGA and Arduino MEGA
• All pins are brought to the top level
• Supports Xbee/GPS bee
• Large prototyping area

Easy way to give voice to your robots and projects
• Supports Chinese and English languages
• Baud rate: 4800,9600,57600,115200
• Interfaces: UART, IIC and SPI

• Arduino compatible WiFi shield V3 supporting AP+STA dual mode
• Provides UART(TTL) to IEEE802.11b/g/n wireless communication
• Transmission rate: 54Mbps - 1Mbps
• Frequency range: 2.4 - 2.497GHz

Description

• Double shield interfaces compatible with Arduino for easy cascading
• Provide maximal 500mA under 3.3V
• Full 2.54mm break out for XBee
• 3 indicator (ON/SLEEP, RSSI, ASS) LED for XBee

Description:
Zduino Ethernet, which contains USB download, POE power, TF card slot etc. as well as lead foot position, is a micro controller board based on Arduino Ethernet; With this module, you can connect micro controller to internet and build your network application.

• Contains everything needed to support the microcontroller
• Power it with a AC-to-DC adapter or battery to get started
• Compatible with all Arduino shields that work at 3.3V
• Arduino board based on a 32-bit ARM core microcontroller

Microcontroller board based on Intel® Quark SoC X1000 processor
• First board based on Intel® architecture designed with Arduino shields compatibility
• Operating voltage: 3.3V
• Digital I/O pins: 14

The Intel® Edison development platform is the first in a series of low-cost, product-ready, general purpose compute platforms that help lower the barriers to entry for entrepreneurs of all sizes—from pro-makers to consumer electronics and companies working in the Internet of Things (IoT).

Galileo is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip. This board, based on Intel® architecture, is designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3.

برد آردوینو Uno یک برد بر پایه میکروکنترلر ATmega328 می باشد و دارای 14 پین ورودی- خروجی دیجیتال است که 6 تای این پین ها می توانند به عنوان خروجی PWM و 6 پین به عنوان ورودی آنالوگ مورد استفاده قرار گیرند.

برای اتصال برد آردوینو به اینترنت می توانید از شیلد GSM استفاده کنید. در این شیلد با وارد کردن سیم کارت متصل به شبکه، قابلیت کنترل دنیای اطراف خود را از طریق اینترنت خواهید داشت. همچنین می توانید مانند تلفن همراه خود تماس صوتی برقرار کنید و برای پروژه های هوشمند سازی محیط از قابلیت امکان و دریافت sms برخوردار خواهید شد.