این ماژول یکی از ماژول ها حرفه ای IMUبوده که از سنسورهای بسیاری ازجمله: جایروسکوپ، شتاب سنج، دماسنج، قطب نمای سه محوره و فشارسنج تشکیل شده است.
این ماژول یک برد کوچک است که تمامی سنسورهای مورد نیاز برای ۱۰ درجه آزادی روی آن قرار گرفته است. ارتباط این ماژول با میکروکنترل ها از طریق رابط i2c برقرار می شود، از این ماژول می توانید در پروژه های مختلفی از جمله ربات های پروازی و... استفاده کنید.
Description
• Hokuyo's UBG-04LX-F01 detectable range is 20mm to 5600mm
• 28msec/scan
• 12V operating voltage
• 240° area scanning range with 0.36° angular resolution
• USB and Serial (RS-232) interfaces for maximum flexibility
Description
• Hokuyo's URG-04LX detectable range is 20mm to 4000mm
• 100msec/scan
• 5V operating voltage
• 240° area scanning range with 0.36° angular resolution
• USB and Serial (RS-232) interfaces for maximum flexibility
Description
• Hokuyo's URG-04LX-UG01 detectable range is 20mm to 5600mm
• 100msec/scan
• 5V operating voltage
• 240° area scanning range with 0.36° angular resolution
Description
Small, lightweight and accurate obstacle detection sensor
Triggers outputs when objects comes within the scanning path
Perfect for indoor applications
Scan ranges up to 5m in a 270° arc
Description
• Power source: 12VDC±10%
• Detection Range: 0.1 to 30m
• Accuracy: 0.1 to 10m ± 30mm, 10 to 30m ±50mm
• Angular Resolution: 0.25°(360°/1,440 steps)
• Possible for outdoor Applications
• Reflective type with easy wiring
• The LN is an obstacle detection scanner that offers a single output when an object comes into the scanning zone.
Description
• Hokuyo's UTM-30LX detectable range is 100mm to 30,000mm (30m!)
• 25msec/scan
• 12V operating voltage
• 270° area scanning range with 0.25° angular resolution
• USB2.0 interface
• The LX is suitable for real-time distance data collection
Description
• Supply voltage: 12VDC ±10%
• Detectable in Snowy, Rainy, Foggy and Dusty conditions
• Ethernet Interface
• Can be used Outdoors
• IP Rating: 67
Description
• Single-zone force sensing resistor
• Device has a 5.6 mm diameter active area and is available in 4 connection options
• Part of the single zone Force Sensing Resistor family
• RoHS Compliant
Description
• Single-zone force sensing resistor
• Device has a 14.7 mm diameter active area and is available in 4 connection options
• Part of the single zone Force Sensing Resistor family
• RoHS Compliant
Description
• Small form factor IR camera with tracking up to four heat/IR sources
• Can be controlled with Arduino, AVR via I2C interface
• Easy to install and to connect
• Connections: Four wires with female sockets for power and I2C
This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them. You just need an additional IC (Like an AD595) for interpeting the data from this sensor.
Description
Faster, more accurate and more powerful than Legacy Lidar-Lite
Compact 48mm x 40mm x 20mm module with 40m measuring range
Signal Processing Improvements offer 5X Faster Measurement Speeds
Improved I2C Communications ans assignable I2C Addressing
Great for drones, robotics and other demanding applications
Description: This wide bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
Description: This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
Description: This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.
Description
• RS232/422 interface
• Opto-electronic distance measuring module for industrial applications
• Millimeter accuracy measurement on any surface
• Easy installation and commissioning
• Meets IP 65 protection class for industrial use
The 4th Generation MTi sets the industry standard for reliable MEMS based AHRS, VRU and IMUs. The MTi 10-series gives the systems integrator a choice of three different integration levels (IMU, VRU or AHRS).
The MTi 100-series is Xsens’ high performance product line, featuring vibration-rejecting gyroscopes. It sets the industry standard for reliable MEMS based INS’s, AHRS’s, VRU’s and IMU’s pioneering as an alternative for optical gyroscopes.
Description: This is the Mindwave Mobile from NeuroSky, an EEG headset that safely measures and transfers the power spectrum (alpha waves, beta waves, etc) data via Bluetooth to wirelessly communicate with your computer, iOS, or Android device. This headset can be simply slipped on to be able to see your brainwaves change in real time.