شیلدهای آردوینو

مرتب سازی بر اساس:   نام محصول (صعودی | نزولی)، قیمت (صعودی | نزولی)، امتیاز مشتریان (صعودی | نزولی)

شیلد GSM اورجینال ایتالیایی

برای اتصال برد آردوینو به اینترنت می توانید از شیلد GSM استفاده کنید. در این شیلد با وارد کردن سیم کارت متصل به شبکه، قابلیت کنترل دنیای اطراف خود را از طریق اینترنت خواهید داشت. همچنین می توانید مانند تلفن همراه خود تماس صوتی برقرار کنید و برای پروژه های هوشمند سازی محیط از قابلیت امکان و دریافت sms برخوردار خواهید شد.

شیلد وایفای EMW3162 با قابلیت پشتیبانی از برد های آردوینو / NUCLEO

EMW3162 WIFI Shield consists of a base board and a WiFi module EMW3162. It allows you to connect your Arduino/Nucleo board with the Internet. Thanks to the EMW3162 WIFI Shield, WiFi communication will become easy for devices that feature Arduino connectivity.

شیلد LCD کاراکتری 1602 آردوینو

Arduino LCD1602 character LCD expansion board , PCB Immersion Gold processing technology, materials and full board with a new high-quality 2 -line 16 -character LCD, not only has the contrast knob, backlight selector switch, also has four directional buttons, an option button and a reset button; this 1602 LCD expansion board to simplify the circuit in the true sense, this plug directly board Arduino Duemilanove to the controller .

Arduino PoE Module 12V

 

IEEE802.3af compliant
Low output ripple and noise
Input voltage: 36V to 57V
Can be used with the Arduino Ethernet shield and Arduino Ethernet

Bluno Nano Arduino BLE Bluetooth Microcontroller

 

  • Bluetooth microcontroller for BLE projects
  • Microcontroller: Atmega328
  • On-board BLE chip: TI CC2540
  • Support AT command to config the BLE

GPS/GPRS/GSM Arduino Shield

 

• Supports GPS technology for satellite navigation
• Embeded high-gain SMD antennas for GPS & GSM
• controlled via AT commands
• USB/Arduino control switch
• Programmable switch for Arduino

شیلد پروتوتایپ مگا 2560

چنانچه شما برد آردوینو مگا را تهیه نموده اید ، برای شروع کار این شیلد یکی از گزینه های های پیشنهادی ما می باشد، با استفاده از این شیلد به راحتی می توانید به پین های برد آردوینو دسترسی داشته باشید و به سرعت مدار خود را پیاده سازی نمایید و در نهایت با لحیم کردن قطعات مدارتان ، این شیلد نمونه سازی را تبدیل به یک شیلد کاربردی و اختصاصی نمایید.

شیلد 3G آردوینو SIM5216E با قابلیت پشتیبانی از HSDPA / WCDMA / GSM /GPRS / EDGE

The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.

شیلد برد آردوینو نانو V3.0

با استفاده از این شیلد می توانید از امکانات برد نانوی خود بهتر استفاده کنید ، رگولاتور و کانکتور ورودی آدابتور ، دکمه ریست  و ... از ویژگی های این شیلد می باشد

شیلد شبکه W5100

این شیلد جهت اتصال برد آردوینو شما به شبکه اینترنت میباشد.تنها با وصل کردن ماژول به برد آردوینو و اتصال به شبکه توسط یک کابل اترنت استاندارد RJ45 و بکارگیری چند دستور ساده در کامپایلر آردوینو می توانید جهان پیرامون خود را از طریق اینترنت کنترل کنید.این شیلد با استفاده ازچیپ Wiznet W5100 اینترنت را به آردوینو به ارمغان می آورد.

قیمت: 7,394,000 ریال

شیلد شبکه آردوینو W5100 R3 - 2013

این شیلد جهت اتصال برد آردوینو شما به شبکه اینترنت میباشد.تنها با وصل کردن ماژول به برد آردوینو و اتصال به شبکه توسط یک کابل اترنت استاندارد RJ45 و بکارگیری چند دستور ساده در کامپایلر آردوینو می توانید جهان پیرامون خود را از طریق اینترنت کنترل کنید.

شیلد موتور درایو L293D

L293 یک درایور چهار کاناله یکپارچه برای پشتیبانی از ولتاژ و جریان بالا می باشد. با استفاده از این درایور می توانید از موتور های دی سی و منبع تغذیه با ولتاژ حداکثر 36 ولت در پروژه خود استفاده نمایید. هر کانال می تواند تا حداکثر 600 میلی آمپر جریان دهی نماید ، همچنین چیپ L293D  به H-Bridge نیز معروف می باشد.  در مجموع H-Bridge مداری است که امکان بارگزاری ولتاژ را به یک خروجی مثل موتور فراهم می کند.

شیلد موتور درایور Arduino Motor Shield L298P R3

The Arduino Motor Shield is based on the L298 ( Datasheet ), Which is a Dual Full-Bridge Driver Designed to drive as Inductive loads SUCH Relays, Solenoids, DC and Stepping motors.

شیلد موتور درایور L298P آردوینو به همراه بازر

  L298P Shield DC motor drive using LGS company's outstanding high-power motor driver chip dedicated L298P, can directly drive two DC motors, drive current up to 2A, motor output using eight high-speed Schottky diodes as protection. Stack design can be directly plugged into the Arduino, more convenient to use!
 

شیلد موتور درایور مونستر موتو - Monster Moto Shield VNH2SP30

شیلد Monser Moto در اصل نسخه ی بالاتر از شیلد درایور Ardumoto است. در این شیلد یک جفت درایور VNH2SP30 full-bridge با درایور L298H-bridge جایگزین شده است. همچنین مدار این برد برای ایجاد قابلیت راه اندازی یک جفت موتور با مصرف جریان بالا تقویت شده است.

شیلد و ماژول USB Host با قابلیت پشتیبانی از Android ADK

با استفاده از این شیلد می توانید بسیاری از وسایل USB خود را از قبیل حافظه فلش ، کیبورد ، ماوس ، دوربین عکاسی ، کار ریدر مقناطیسی ، آر اف آی دی ریدر  ، مودم GPRS ، 3G ، گوشی موبایل و بسیاری از وسایل دیگر خود را از طریق این شیلد مستقیما به برد آردوینو متصل نمایید. این شیلد از اندروید ADK نیز پشتیبانی می نماید.

شیلد پروتوتایپ آردوینو Uno همراه با Bread Board

چنانچه شما برد آردوینو Uno را تهیه نموده اید ، برای شروع کار این شیلد یکی از گزینه های های پیشنهادی ما می باشد، با استفاده از این شیلد به راحتی می توانید به پین های برد آردوینو دسترسی داشته باشید و به سرعت مدار خود را پیاده سازی نمایید و در نهایت با لحیم کردن قطعات مدارتان ، این شیلد نمونه سازی را تبدیل به یک شیلد کاربردی و اختصاصی نمایید.

شیلد درایور CNC ورژن 3

100% brand new and high quality
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.

Arduino Compatible Mega Motor Shield 13A, 5-28V

 

Low-cost robust H-bridge ''shield'' for Arduino
Provides the ability to control up to 30A of current at up to 28V
Supply voltage: 5V to 28V (24V max battery rating)
Continuous output current: 13A

DFRobot Relay Shield 2.1 for Arduino

 

Completely new design capable of controlling 4 relays
Compatible with Arduino UNO Rev3
Each Relay has its own test button
Supply Voltage: 9V

Bluetooth Shield for Arduino (Master Slave)

 

Can be easily used with Arduino/Iteaduino for transparent wireless serial communication
Integrates a Serial Bluetooth module
On board PCB antenna
Up to10m communication distance in house without obstacle

XBee Shield for Arduino

Description

• Double shield interfaces compatible with Arduino for easy cascading
• Provide maximal 500mA under 3.3V
• Full 2.54mm break out for XBee
• 3 indicator (ON/SLEEP, RSSI, ASS) LED for XBee

Arduberry Raspberry Pi to Arduino Shield Adapter

 

• Shield for the Raspberry Pi to connect Arduino shields
• Requires no physical configuration to work with most shields
• Allows to stack and use Arduino shields over the Raspberry Pi
• Simple and inexpensive way to unite the two systems

MP3 Shield for Arduino

• High quality MP3 shield with Arduino compatiblity
• Able to decode and play MP3 audio files from microSD card
• Stackable side headers to allow more Arduino shields to be stacked
• On board high quality 24 bits audio DAC

DFRobot Joystick / Input Shield for Arduino

 

  • Arduino input shield with two axis mini joystick
  • APC220 radio data module interface and Xbee interface
  • Easily stacked on top of your Arduino boards
  • Comes with 4 colored push buttons

16A Relay Module Arduino Compatible

• Contact rating (Res. load):16A 277VAC/24VDC
• Maximum switching voltage: 400VAC(NO)
• Maximum switching current: 16A
• Maximum switching power: 4700VA

DFRobot EEPROM Data Storage Module For Arduino

Provides an extra 32k byte for your project
Supply voltage: +5V
Current: <10mA
Interface: I2C/TWI
EEPROM: AT24C256
Weight: 5g
Comes with interface cable which can be integrated with DFRobot Multi-Interface Shield

 

4x 7-Segment Arduino Compatible Digit Shield

 

Only uses 4 Arduino pins (2,3,4,5)
All through-hole parts for easy kit assembly
Available in green display color only at this time

MicroView OLED Arduino Compatible Microcontroller

 

  • First chip-sized Arduino compatible module
  • On-board 64x48 pixel OLED
  • Consist of ATmega328P and 5V & 3.3V LDO
  • Arduino IDE 1.0+ compatible

Speech Synthesis Shield for Arduino

Easy way to give voice to your robots and projects
• Supports Chinese and English languages
• Baud rate: 4800,9600,57600,115200
• Interfaces: UART, IIC and SPI

Real-Time Clock Module(Arduino Gadgeteer Compatible)

External Power Range: 3.3V - 5.5V
• Interface: I2C and Interrupt Output
• Selectable 12/24 Hours Format
• 0.5s IIC Bus auto reset function to avoid from getting stuck

MQ2 Gas/Smoke Detector Shield for pcDuino/Arduino

  • MQ2 smoke detector shield for Arduino/pcDuino
  • Detects the concentrations of combustible gas in air
  • Measures concentrations of 300 to 10,000 ppm
  • Consumes less than 150mA at 5V

WiFi Shield V3 for Arduino

  • Arduino compatible WiFi shield V3 supporting AP+STA dual mode
  • Provides UART(TTL) to IEEE802.11b/g/n wireless communication
  • Transmission rate: 54Mbps - 1Mbps
  • Frequency range: 2.4 - 2.497GHz

Dual Bipolar Stepper Motor Controller for Arduino

• Easily control 2 stepper motors with only 4 digital I/Os
• Five different microstep resolutions (down to 1/16-step)
• 10 channel digital I/O & 6 channel Analog I/O addition
• Input voltage: 8-35V DC

Arduino LilyPad Power Supply

 

A small, but mighty power supply
Designed to be as small and inconspicuous as possible
Board has AAA battery clips but can use an input from 1.2V to 5V
RoHS Compliant