16A Relay Module Arduino Compatible

• Contact rating (Res. load):16A 277VAC/24VDC
• Maximum switching voltage: 400VAC(NO)
• Maximum switching current: 16A
• Maximum switching power: 4700VA

2.4" TFT LCD Touch Shield for Arduino

 

Arduino UNO Rev3 / Mega Shield compatible footprint
Can work with both 3.3V and 5V
Can dispaly on Chipkit UNO32 and Simplecortex as well
Backlight : LED

4x 7-Segment Arduino Compatible Digit Shield

 

Only uses 4 Arduino pins (2,3,4,5)
All through-hole parts for easy kit assembly
Available in green display color only at this time

86Duino ONE Vortex86EX Arduino Compatible Microcontroller

 

  • High performance and fully static 32-bit x86 processor board
  • Sensor: LSM330DLC (6-axis accelerometer & gyro)
  • Communication: I2C, SPI, UART, RS485, CAN, LAN
  • Digital I/O pins: 45 (11 provide 32bit PWM output)
  • Memory: 128MB DDR3

Arduberry Raspberry Pi to Arduino Shield Adapter

 

• Shield for the Raspberry Pi to connect Arduino shields
• Requires no physical configuration to work with most shields
• Allows to stack and use Arduino shields over the Raspberry Pi
• Simple and inexpensive way to unite the two systems

Arduino Compatible Mega Motor Shield 13A, 5-28V

 

Low-cost robust H-bridge ''shield'' for Arduino
Provides the ability to control up to 30A of current at up to 28V
Supply voltage: 5V to 28V (24V max battery rating)
Continuous output current: 13A

Arduino Due R3

برد آردوینو Due یک میکروکنترلر بر پایه SAM3X8E ARM Cortex-M3 CPU از شرکت Atmel می باشد. این برد، اولین برد آردوینویی است که بر اساس میکروکنترلر با هسته ARM 32 بیتی پایه ریزی شده است.

Arduino LilyPad Power Supply

 

A small, but mighty power supply
Designed to be as small and inconspicuous as possible
Board has AAA battery clips but can use an input from 1.2V to 5V
RoHS Compliant

Arduino Nano 7-12V, 2A Dual Motor Controller

 

Dual full H-Bridge driver with PWM control
2Amps per motor, 24VDC maximum motor voltage
Large high quality decoupling capacitors
Arduino Nano is not included

Arduino Nano MP3 Board

 

Advance MP3 decoder IC, VS1053B
On-board audio amplifier, volume control, speaker
Breadboard friendly, small size 3.7'' x 1.1''
Four mounting holes for standalone application
Arduino Nano USB Microcontroller v3 is not included

Arduino PoE Module 12V

 

IEEE802.3af compliant
Low output ripple and noise
Input voltage: 36V to 57V
Can be used with the Arduino Ethernet shield and Arduino Ethernet

Arduino Uno Rev3

برد آردوینو Uno یک میکروکنترلر بر پایه ATmega328 می باشد . این برد 14 پین ورودی و خروجی دیجیتال (که 6 تای آن می تواند به عنوان خروجی PWM استفاده گردد)، 6 ورودی آنالوگ، یک تشدیدگر سرامیکی 16مگاهرتز (Ceramic Resonator)، یک پورت USB، یک پاورجک (ورودی منبع تغذیه)، یک ICSP header و یک دکمه ریست دارد. برد Uno شامل کلیه امکانات مورد نیاز جهت بکارگیری میکروکنترلر موجود بر روی برد می باشد. برای شروع تنها با یک کابل USB، به سـادگی برد را به کامپیوترتان متصـل کنید و یـا آن را با یـک آداپـتور AC-To-DC و یا باتری راه اندازی نمایید.

Bluetooth Shield for Arduino (Master Slave)

 

Can be easily used with Arduino/Iteaduino for transparent wireless serial communication
Integrates a Serial Bluetooth module
On board PCB antenna
Up to10m communication distance in house without obstacle

Bluno Nano Arduino BLE Bluetooth Microcontroller

 

  • Bluetooth microcontroller for BLE projects
  • Microcontroller: Atmega328
  • On-board BLE chip: TI CC2540
  • Support AT command to config the BLE

DFRobot Arduino Compatible Variable Power Shield

 

Supply: 4.5V - 35V
Output: 1.25 - 12V
Output current: 2A (3A peak)
Efficiency: 90%
Arduino compatible

DFRobot EEPROM Data Storage Module For Arduino

Provides an extra 32k byte for your project
Supply voltage: +5V
Current: <10mA
Interface: I2C/TWI
EEPROM: AT24C256
Weight: 5g
Comes with interface cable which can be integrated with DFRobot Multi-Interface Shield

 

DFRobot Flyduino-A 12 Servo Controller (Arduino Compatible)

Working voltage:3.3V
Speically designed for controlling servos
 Arduino Compatible
Features a 12 standard servo control capbility with an Xbee socket

DFRobot Joystick / Input Shield for Arduino

 

  • Arduino input shield with two axis mini joystick
  • APC220 radio data module interface and Xbee interface
  • Easily stacked on top of your Arduino boards
  • Comes with 4 colored push buttons

DFRobot Relay Shield 2.1 for Arduino

 

Completely new design capable of controlling 4 relays
Compatible with Arduino UNO Rev3
Each Relay has its own test button
Supply Voltage: 9V

Dual Bipolar Stepper Motor Controller for Arduino

• Easily control 2 stepper motors with only 4 digital I/Os
• Five different microstep resolutions (down to 1/16-step)
• 10 channel digital I/O & 6 channel Analog I/O addition
• Input voltage: 8-35V DC

GPRS/GSM - EFCom Arduino Compatible Module

 

  • EFCom arduino compatible module
  • Fully compatible with AVR/Arduino/ARM/FPGA
  • Super capacitor power supply for the RTC
  • Supply voltage range of 3.1 to 4.8V

GPS/GPRS/GSM Arduino Shield

 

• Supports GPS technology for satellite navigation
• Embeded high-gain SMD antennas for GPS & GSM
• controlled via AT commands
• USB/Arduino control switch
• Programmable switch for Arduino

IBridge Keypad Shield for Arduino

4X4 key-pad shield with a 5110 Graphic LCD interface
Can plug it on Arduino boards directly
Can get the small development platform with keypad input and Graphic LCD display
Version: 1.1

Mega Prototyping Shield for Arduino Mega

 

This is a design for an open-source prototyping shield for Arduino Mega. It has tons of cool features, to make prototyping on your Arduino easy. Some assembling and soldering is required!

 
قیمت: 3,595,000 ریال

MicroSD Adapter for Arduino

Working Voltage: 5V
Compatible with TF SD card, which is the most tiny card in the market
Includes various applications such as data logging, audio, video, graphics
Greatly expands the Arduino memory
Interface: SPI

 

MicroView OLED Arduino Compatible Microcontroller

 

  • First chip-sized Arduino compatible module
  • On-board 64x48 pixel OLED
  • Consist of ATmega328P and 5V & 3.3V LDO
  • Arduino IDE 1.0+ compatible

MP3 Shield for Arduino

• High quality MP3 shield with Arduino compatiblity
• Able to decode and play MP3 audio files from microSD card
• Stackable side headers to allow more Arduino shields to be stacked
• On board high quality 24 bits audio DAC

MQ2 Gas/Smoke Detector Shield for pcDuino/Arduino

  • MQ2 smoke detector shield for Arduino/pcDuino
  • Detects the concentrations of combustible gas in air
  • Measures concentrations of 300 to 10,000 ppm
  • Consumes less than 150mA at 5V

NFC Module for Arduino

Host Interface: UART
Working Voltage: 3.3v or 5v
Serve for contactless communication at 13.56MHz
Supports ISO 14443B in reader/writer mode only