مرتب سازی بر اساس:   نام محصول (صعودی | نزولی)، قیمت (صعودی | نزولی)، امتیاز مشتریان (صعودی | نزولی)

Zduino Ethernet


Description:
Zduino Ethernet, which contains USB download, POE power, TF card slot etc. as well as lead foot position, is a micro controller board based on Arduino Ethernet; With this module, you can connect micro controller to internet and build your network application.

XBee Shield for Arduino

Description

• Double shield interfaces compatible with Arduino for easy cascading
• Provide maximal 500mA under 3.3V
• Full 2.54mm break out for XBee
• 3 indicator (ON/SLEEP, RSSI, ASS) LED for XBee

WiFi Shield V3 for Arduino

  • Arduino compatible WiFi shield V3 supporting AP+STA dual mode
  • Provides UART(TTL) to IEEE802.11b/g/n wireless communication
  • Transmission rate: 54Mbps - 1Mbps
  • Frequency range: 2.4 - 2.497GHz

Speech Synthesis Shield for Arduino

Easy way to give voice to your robots and projects
• Supports Chinese and English languages
• Baud rate: 4800,9600,57600,115200
• Interfaces: UART, IIC and SPI

Seeeduino Protoshield Kit for Arduino Mega

• Supports both Seeeduino MEGA and Arduino MEGA
• All pins are brought to the top level
• Supports Xbee/GPS bee
• Large prototyping area

SD Shield for Arduino

  • SD card shield to add storage in Arduino project
  • SD card, Micro SD card and SDHC card supportable
  • On-board toggle switch to select the SD card type
  • I2C header and UART header on board

RGB LED Matrix Driver Shield for Arduino

Directly plug on the Arduino board
• Can use the Arduino to drive the matrix like the Colorduino/Rainbowduino
• Hardware 16MHz PWM support
• 8 super source driver channels of 500mA each

Real-Time Clock Module(Arduino Gadgeteer Compatible)

External Power Range: 3.3V - 5.5V
• Interface: I2C and Interrupt Output
• Selectable 12/24 Hours Format
• 0.5s IIC Bus auto reset function to avoid from getting stuck

ProtoShield Basic Prototyping Board for Arduino

  • Arduino compatible prototyping board
  • Gold plated PCB for easy soldering
  • Mounting pads for buttons, LEDs and capacitors
  • Clearly marked GND and 5V rails beside prototyping area

شیلد پروتوتایپ مگا 2560

چنانچه شما برد آردوینو مگا را تهیه نموده اید ، برای شروع کار این شیلد یکی از گزینه های های پیشنهادی ما می باشد، با استفاده از این شیلد به راحتی می توانید به پین های برد آردوینو دسترسی داشته باشید و به سرعت مدار خود را پیاده سازی نمایید و در نهایت با لحیم کردن قطعات مدارتان ، این شیلد نمونه سازی را تبدیل به یک شیلد کاربردی و اختصاصی نمایید.

شیلد پروتوتایپ آردوینو Uno همراه با Bread Board

چنانچه شما برد آردوینو Uno را تهیه نموده اید ، برای شروع کار این شیلد یکی از گزینه های های پیشنهادی ما می باشد، با استفاده از این شیلد به راحتی می توانید به پین های برد آردوینو دسترسی داشته باشید و به سرعت مدار خود را پیاده سازی نمایید و در نهایت با لحیم کردن قطعات مدارتان ، این شیلد نمونه سازی را تبدیل به یک شیلد کاربردی و اختصاصی نمایید.

شیلد وایفای EMW3162 با قابلیت پشتیبانی از برد های آردوینو / NUCLEO

EMW3162 WIFI Shield consists of a base board and a WiFi module EMW3162. It allows you to connect your Arduino/Nucleo board with the Internet. Thanks to the EMW3162 WIFI Shield, WiFi communication will become easy for devices that feature Arduino connectivity.

شیلد و ماژول USB Host با قابلیت پشتیبانی از Android ADK

با استفاده از این شیلد می توانید بسیاری از وسایل USB خود را از قبیل حافظه فلش ، کیبورد ، ماوس ، دوربین عکاسی ، کار ریدر مقناطیسی ، آر اف آی دی ریدر  ، مودم GPRS ، 3G ، گوشی موبایل و بسیاری از وسایل دیگر خود را از طریق این شیلد مستقیما به برد آردوینو متصل نمایید. این شیلد از اندروید ADK نیز پشتیبانی می نماید.

شیلد موتور درایور مونستر موتو - Monster Moto Shield VNH2SP30

شیلد Monser Moto در اصل نسخه ی بالاتر از شیلد درایور Ardumoto است. در این شیلد یک جفت درایور VNH2SP30 full-bridge با درایور L298H-bridge جایگزین شده است. همچنین مدار این برد برای ایجاد قابلیت راه اندازی یک جفت موتور با مصرف جریان بالا تقویت شده است.

شیلد موتور درایور L298P آردوینو به همراه بازر

  L298P Shield DC motor drive using LGS company's outstanding high-power motor driver chip dedicated L298P, can directly drive two DC motors, drive current up to 2A, motor output using eight high-speed Schottky diodes as protection. Stack design can be directly plugged into the Arduino, more convenient to use!
 

شیلد موتور درایور Arduino Motor Shield L298P R3

The Arduino Motor Shield is based on the L298 ( Datasheet ), Which is a Dual Full-Bridge Driver Designed to drive as Inductive loads SUCH Relays, Solenoids, DC and Stepping motors.

شیلد موتور درایو L293D

L293 یک درایور چهار کاناله یکپارچه برای پشتیبانی از ولتاژ و جریان بالا می باشد. با استفاده از این درایور می توانید از موتور های دی سی و منبع تغذیه با ولتاژ حداکثر 36 ولت در پروژه خود استفاده نمایید. هر کانال می تواند تا حداکثر 600 میلی آمپر جریان دهی نماید ، همچنین چیپ L293D  به H-Bridge نیز معروف می باشد.  در مجموع H-Bridge مداری است که امکان بارگزاری ولتاژ را به یک خروجی مثل موتور فراهم می کند.

شیلد شبکه W5100

این شیلد جهت اتصال برد آردوینو شما به شبکه اینترنت میباشد.تنها با وصل کردن ماژول به برد آردوینو و اتصال به شبکه توسط یک کابل اترنت استاندارد RJ45 و بکارگیری چند دستور ساده در کامپایلر آردوینو می توانید جهان پیرامون خود را از طریق اینترنت کنترل کنید.این شیلد با استفاده ازچیپ Wiznet W5100 اینترنت را به آردوینو به ارمغان می آورد.

قیمت: 7,394,000 ریال

شیلد شبکه آردوینو W5100 R3 - 2013

این شیلد جهت اتصال برد آردوینو شما به شبکه اینترنت میباشد.تنها با وصل کردن ماژول به برد آردوینو و اتصال به شبکه توسط یک کابل اترنت استاندارد RJ45 و بکارگیری چند دستور ساده در کامپایلر آردوینو می توانید جهان پیرامون خود را از طریق اینترنت کنترل کنید.

شیلد درایور CNC ورژن 3

100% brand new and high quality
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.

شیلد برد آردوینو نانو V3.0

با استفاده از این شیلد می توانید از امکانات برد نانوی خود بهتر استفاده کنید ، رگولاتور و کانکتور ورودی آدابتور ، دکمه ریست  و ... از ویژگی های این شیلد می باشد

شیلد LCD کاراکتری 1602 آردوینو

Arduino LCD1602 character LCD expansion board , PCB Immersion Gold processing technology, materials and full board with a new high-quality 2 -line 16 -character LCD, not only has the contrast knob, backlight selector switch, also has four directional buttons, an option button and a reset button; this 1602 LCD expansion board to simplify the circuit in the true sense, this plug directly board Arduino Duemilanove to the controller .

شیلد GSM اورجینال ایتالیایی

برای اتصال برد آردوینو به اینترنت می توانید از شیلد GSM استفاده کنید. در این شیلد با وارد کردن سیم کارت متصل به شبکه، قابلیت کنترل دنیای اطراف خود را از طریق اینترنت خواهید داشت. همچنین می توانید مانند تلفن همراه خود تماس صوتی برقرار کنید و برای پروژه های هوشمند سازی محیط از قابلیت امکان و دریافت sms برخوردار خواهید شد.

شیلد 3G آردوینو SIM5216E با قابلیت پشتیبانی از HSDPA / WCDMA / GSM /GPRS / EDGE

The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.

برد آردوینو مینی 05 اورجینال ایتالیایی

The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is at a premium. The revision 05 has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button.

برد آردوینو UNO CH340G

این برد بسیار شبیه آردوینو UNO R3 معمولی  می باشد با این تفاوت که میکروکنترلر استفاده شده بر روی آن atmega328p-au می باشد که به صورت TQFP عرضه می گردد.

قیمت: 2,285,000 ریال

برد آردوینو Tiny LilyPad

Feature:
Micro MCU:ATTINY85
Wearable
8K Byte of In-System Programmable Program Memory Flash
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAM

قیمت: 2,160,000 ریال

برد آردوینو اورجینال Mega ADK REV3

The Arduino Mega ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones.

برد آردوینو اسپلورا - Arduino Esplora

The Arduino Esplora is a ready-to-use, easy-to-hold controller that lets you explore the infinite possibilities you have in the world of Arduino, without having to deal with breadboards or soldering. Shaped like a game controller, it’s designed to be used out of the box without extra parts since it comes with many sensors and actuators already on it.