پارامترهای قابل انتخاب
- سنسور
- بردهای میکروکنترلر
- مینی کامپیوتر
- باتری و مدارات تغذیه
- مخابرات و کنترل
- قطعات الکترونیکی و مدارات مجتمع
- لوازم جانبی
- سایر ماژول ها
- موتور ها و عملگر ها
- آردوینو
- بردهای آردوینو
- شیلدهای آردوینو
- کنترلر موتور
- LCD / نمایشگر
- آنالایزر و پروگرامر
- ذخیره داده
- مکانیک
- کیت های رباتیک
- کابل/سیم
- ماژول رله و سوییچ
- RFID/NFC
- PCB و بردهای مبدل SMD به DIP
- ریموت کنترل و گیرنده
- دست دوم
آردوینو
Arduino Uno Rev3
برد آردوینو Uno یک میکروکنترلر بر پایه ATmega328 می باشد . این برد 14 پین ورودی و خروجی دیجیتال (که 6 تای آن می تواند به عنوان خروجی PWM استفاده گردد)، 6 ورودی آنالوگ، یک تشدیدگر سرامیکی 16مگاهرتز (Ceramic Resonator)، یک پورت USB، یک پاورجک (ورودی منبع تغذیه)، یک ICSP header و یک دکمه ریست دارد. برد Uno شامل کلیه امکانات مورد نیاز جهت بکارگیری میکروکنترلر موجود بر روی برد می باشد. برای شروع تنها با یک کابل USB، به سـادگی برد را به کامپیوترتان متصـل کنید و یـا آن را با یـک آداپـتور AC-To-DC و یا باتری راه اندازی نمایید.
Arduino PoE Module 12V
• IEEE802.3af compliant
• Low output ripple and noise
• Input voltage: 36V to 57V
• Can be used with the Arduino Ethernet shield and Arduino Ethernet
Arduino Nano MP3 Board
• Advance MP3 decoder IC, VS1053B
• On-board audio amplifier, volume control, speaker
• Breadboard friendly, small size 3.7'' x 1.1''
• Four mounting holes for standalone application
• Arduino Nano USB Microcontroller v3 is not included
Arduino Nano 7-12V, 2A Dual Motor Controller
• Dual full H-Bridge driver with PWM control
• 2Amps per motor, 24VDC maximum motor voltage
• Large high quality decoupling capacitors
• Arduino Nano is not included
Arduino LilyPad Power Supply
• A small, but mighty power supply
• Designed to be as small and inconspicuous as possible
• Board has AAA battery clips but can use an input from 1.2V to 5V
• RoHS Compliant
Arduino Intel® Galileo Microcontroller
Microcontroller board based on Intel® Quark SoC X1000 processor
• First board based on Intel® architecture designed with Arduino shields compatibility
• Operating voltage: 3.3V
• Digital I/O pins: 14
Arduino Gemma
Arduino Due R3
برد آردوینو Due یک میکروکنترلر بر پایه SAM3X8E ARM Cortex-M3 CPU از شرکت Atmel می باشد. این برد، اولین برد آردوینویی است که بر اساس میکروکنترلر با هسته ARM 32 بیتی پایه ریزی شده است.
Arduino Due 32bit ARM Microcontroller
• Contains everything needed to support the microcontroller
• Power it with a AC-to-DC adapter or battery to get started
• Compatible with all Arduino shields that work at 3.3V
• Arduino board based on a 32-bit ARM core microcontroller
Arduino Compatible Mega Motor Shield 13A, 5-28V
• Low-cost robust H-bridge ''shield'' for Arduino
• Provides the ability to control up to 30A of current at up to 28V
• Supply voltage: 5V to 28V (24V max battery rating)
• Continuous output current: 13A
Arduberry Raspberry Pi to Arduino Shield Adapter
• Shield for the Raspberry Pi to connect Arduino shields
• Requires no physical configuration to work with most shields
• Allows to stack and use Arduino shields over the Raspberry Pi
• Simple and inexpensive way to unite the two systems
86Duino ONE Vortex86EX Arduino Compatible Microcontroller
- High performance and fully static 32-bit x86 processor board
- Sensor: LSM330DLC (6-axis accelerometer & gyro)
- Communication: I2C, SPI, UART, RS485, CAN, LAN
- Digital I/O pins: 45 (11 provide 32bit PWM output)
- Memory: 128MB DDR3
4x 7-Segment Arduino Compatible Digit Shield
• Only uses 4 Arduino pins (2,3,4,5)
• All through-hole parts for easy kit assembly
• Available in green display color only at this time
2.4" TFT LCD Touch Shield for Arduino
• Arduino UNO Rev3 / Mega Shield compatible footprint
• Can work with both 3.3V and 5V
• Can dispaly on Chipkit UNO32 and Simplecortex as well
• Backlight : LED
16A Relay Module Arduino Compatible
• Contact rating (Res. load):16A 277VAC/24VDC
• Maximum switching voltage: 400VAC(NO)
• Maximum switching current: 16A
• Maximum switching power: 4700VA